Basic concept and system disorder assignment.

This a research which is not in a form of essay but templates detailing all the areas that need to be worked on. Cite source in APA format. Four pages including title page and reference.

An example: Basic concept is mobility and system disorder will be fractured hip.

Renal failure basic concept and systems disorder.

1.Complete the three areas of the basic concept template describing this concept in detail.

Under basic concept talk about the related content (delegation, levels of prevention, advanced directives) underlying principles and nursing intervention (who, when, how why).

Complete an analysis reviewing how the selected concept and systems disorder is related.

2.Complete all areas of the systems disorder template.

Talk about alterations in health (diagnosis), Pathophysiology relating to the patient, health promotion and disease prevention.

Assessment: risk factors, expected findings, lab test, safety consideration and diagnostic procedures.

Patient centered care: nursing care, medication, patient education, complications, therapeutic procedures, interprofessional care.

In the media introduction to this module, it was suggested that you as a nurse have an important role in the Systems Development Life Cycle (SDLC). With a focus on patient care and outcomes, nurses may not always see themselves as contributors to the development of new systems. However, as you may have observed in your own experience, exclusion of nurse contributions when implementing systems can have dire consequences.

In this Discussion, you will consider the role you might play in systems development and the ramifications of not being an active participant in systems development.

To Prepare:

• Review the steps of the Systems Development Life Cycle (SDLC) as presented in the Resources.
• Reflect on your own healthcare organization and consider any steps your healthcare organization goes through when purchasing and implementing a new health information technology system.
• Consider what a nurse might contribute to decisions made at each stage of the SDLC when planning for new health information technology.

Homework:- Post a 3 Paragraph description of what you believe to be the consequences of a healthcare organization not involving nurses in each stage of the SDLC when purchasing and implementing a new health information technology system. Provide specific examples of potential issues at each stage of the SDLC and explain how the inclusion of nurses may help address these issues. Then, explain whether you had any input in the selection and planning of new health information technology systems in your nursing practice or healthcare organization and explain potential impacts of being included or not in the decision-making process. Be specific and provide examples.

Kindly use these 3 references below:

 1. Louis, I. (2011, August 17). Systems development life cycle (SDLC) [Video file]. Retrieved from https://www.youtube.com/watch?v=xtpyjPrpyX8

2. Laureate Education (Producer). (2018). Interoperability, Standards, and Security [Video file]. Baltimore, MD: Author

3. McGonigle, D., & Mastrian, K. G. (2017). Nursing informatics and the foundation of knowledge (4th ed.). Burlington, MA: Jones & Bartlett Learning.

• Chapter 9, “Systems Development Life Cycle: Nursing Informatics and Organizational Decision Making” (pp. 175–187)
• Chapter 12, “Electronic Security” (pp. 229–242)
• Chapter 13, “Workflow and Beyond Meaningful Use” (pp. 245–261)

A.  Discuss the impact of a clinical practice problem on the patient(s) and the organization it affects.

1.  Identify the following PICO components of the clinical practice problem:

•   patient/population/problem (P)

•   intervention (I)

•   comparison (C)

•   outcome (O)

2.  Develop an evidence-based practice (EBP) question based on the clinical practice problem discussed in part A and the PICO components identified in part A1.

 Note:  Refer to “Appendix B: Question Development Tool” for information on the creation of an EBP question. 

B.  Select a research-based article that answers your EBP question from part A2 to conduct an evidence appraisal.

1.  Discuss the background or introduction (i.e., the purpose) of the research article.

2.  Describe the research methodology.

3.  Identify the level of evidence using the Johns Hopkins Nursing Evidence-Based Practice (JHNEBP) model.

Note: The article you select should not be more than five years old. 
Note:  Refer to “Appendix E: Research Evidence Appraisal Tool” for information on how to level a research-based article.

4.  Summarize how the researcher analyzed the data in the article.

5.  Summarize the ethical consideration(s) of the research-based article. If none are present, explain why.

6.  Identify the quality rating of the research-based article according to the JHNEBP model.

Note:  Refer to “Appendix E: Research Evidence Appraisal Tool” for information on how to establish the quality rating.

7.  Analyze the results or conclusions of the research-based article and explain how the article helps answer your EBP question.

C.  Select a non-research article from a peer-reviewed journal that helps to answer your EBP question from part A2 to conduct an evidence appraisal.

1.  Discuss the background or introduction (i.e., the purpose) of the non-research article.

2.  Describe the type of evidence (e.g., case study, quality improvement project, clinical practice guideline).

3.  Identify the level of evidence using the JHNEBP model.

Note: The article you select should not be more than five years old. 
Note:  Refer to “Appendix F: Non-Research Evidence Appraisal Tool” for information on how to level the non-research-based article.

4.  Identify the quality rating of the non-research-based article according to the JHNEBP model.

5.  Discuss how the author’s recommendation(s) in the article helps to answer your EBP question.

D.  Recommend a practice change that addresses your EBP question using both the research and non-research articles you selected for Part B and Part C.

1.  Explain how you would involve three key stakeholders in supporting the practice change recommendation.

2.  Discuss one specific barrier you may encounter when implementing the practice change recommendation.

3.  Identify one strategy that could be used to overcome the barrier discussed in part D2.

4.  Identify one outcome (the O component in PICO) from your EBP question to measure the recommended practice change.

E.  Acknowledge sources, using APA-formatted in-text citations and references, for content that is quoted, paraphrased, or summarized.

F.  Demonstrate professional communication in the content and presentation of your submission.

Activity 6

Emergency Response Planning 

Emergency response planning is the organization, coordination, and direction of available resources to respond to an event or bring and emergency under control.

Select one of the scenarios below and complete the activity.

Earthquake Emergency Response

The healthcare team has just been notified that there was an earthquake in the Sentinel Mountains that has destroyed buildings in Industrial Heights and Casper Park residential area of Sentinel City®. 

• Visit the Industrial Heights and Casper Park residential areas of Sentinel City® and consider the impact zone of an earthquake.  Observe the services, routes and populations that may be involved with the city as a result of the earthquake.
• Create a report that describes the potential public health effects, infrastructure damage and environmental hazards related to the earthquake.  Describe the members and roles of the emergency management team and organizations (public and private) that would be activated in Sentinel City®. 
• Who are the members of the emergency response team that will be deployed? What private and public resources will assist with the response in the short and long term?
• What are the risks and benefits of the quick public responses that will be shared on social media?

Tornado Emergency Response

The healthcare team has just been notified that there was a tornado that ripped through Casper Park and Acer Tech Center in Sentinel City®. 

• Visit the Casper Park and Acer Tech Center areas of Sentinel City® and consider the impact zone of the tornado.  Observe the services, routes and populations that may be involved with the city as a result of the tornado.
• Create a report that describes the potential public health effects, infrastructure damage and environmental hazards related to the tornado.  Describe the members and roles of the emergency management team and organizations (public and private) that would be activated in Sentinel City®. 
• Who are the members of the emergency response team that will be deployed? What private and public resources will assist with the response in the short and long term?
• What are the risks and benefits of the quick public responses that will be shared on social media?

Civic Disturbance Emergency Response

The healthcare team has just been notified that there is a civic disturbance at City Hall with injuries in Sentinel City®.

• Visit the area City Hall.  Observe the services, routes and populations that may be involved with the city as a result of the civic disturbance.
• Create a report that describes the potential public health effects and environmental hazards related to the civic disturbance.  Describe the members and roles of the emergency management team and organizations (public and private) that would be activated in Sentinel City®. 
• Who are the members of the emergency response team that will be deployed? What private and public resources will assist with the response in the short and long term?
• What are the risks and benefits of the quick public responses that will be shared on social media?

The DNP must have a basic understanding of statistical measurements and how they apply within the parameters of data management and analytics. In this assignment, you will demonstrate understanding of basic statistical tests and how to perform the appropriate test for the project using SPSS or other statistical programs.

General Requirements:

Use the following information to ensure successful completion of the assignment:

• Refer to “Setting Up My SPSS,” “SPSS Database,” and “Comparison Table of the Variable’s Level of Measurement,” located in the DNP 830 folder of the DC Network Practice Immersion workspace.
• Doctoral learners are required to use APA style for their writing assignments. The APA Style Guide is located in the Student Success Center.
• This assignment uses a rubric. Review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion.
• You are required to submit this assignment to LopesWrite. Refer to the LopesWrite Technical Support articles for assistance. 

Directions:

1. Set up your IBM SPSS account and run several statistical outputs based on the “SPSS Database” Use “Setting Up My SPSS” to set up your SPSS program on your computer or device. You may also use programs such as Laerd Statistics or Intellectus, if you subscribe to them.
2. The patient outcome or dependent variables and the level of measurement must be displayed in a comparison table which you will provide as an Appendix to the paper. Refer to the “Comparison Table of the Variable’s Level of Measurement.”
3. Submit a 1,000-1,250 word data analysis paper outlining the procedures used to analyze the parametric and non-parametric variables in the mock data, the statistics reported, and a conclusion of the results.

Provide a conclusive result of the data analyses based on the guidelines below for statistical significance.

1. PAIRED SAMPLE T-TEST: Identify the variables BaselineWeight and InterventionWeight. Using the Analysis menu in SPSS, go to Compare Means, Go to the Paired Sample t-test. Add the BaselineWeight and InterventionWeight in the Pair 1 fields. Click OK. Report the mean weights, standard deviations, t-statistic, degrees of freedom, and p level. Report as t(df)=value, p = value. Report the p level out three digits.
2. INDEPENDENT SAMPLE T-TEST: Identify the variables InterventionGroups and PatientWeight. Go to the Analysis Menu, go to Compare Means, Go to Independent Samples tT-test. Add InterventionGroups to the Grouping Factor. Define the groups according to codings in the variable view (1=Intervention, 2 =Baseline). Add PatientWeight to the test variable field. Click OK. Report the mean weights, standard deviations, t-statistic, degrees of freedom, and p level. Report t(df)=value, p = value. Report the p level out three digits
3. CHI-SQUARE (Independent): Identify the variables BaselineReadmission and InterventionReadmission. Go to the Analysis Menu, go to Descriptive Statistics, go to Crosstabs. Add BaselineReadmission to the row and InterventionReadmission to the column. Click the Statistics button and choose Chi-Square. Select eta to report the Effect Size. Click suppress tables. Click OK. Report the frequencies of the total events, the chi-square statistic, degrees of freedom, and p level. Report ꭓ2 (df) =value, p =value. Report the p level out three digits.
4. MCNEMAR (Paired): Identify the variables BaselineCompliance and InterventionCompliance. Go to the Analysis Menu, go to Descriptive Statistics, go to Crosstabs. Add BaselineCompliance to the row and InterventionCompliance to the column. Click the Statistics button and choose Chi-Square and McNemars. Select eta to report the Effect Size. Click suppress tables. Click OK. Report the frequencies of the events, the Chi-square, and the McNemar’s p level. Report (p =value). Report the p level out three digits.
5. MANN WHITNEY U: Identify the variables InterventionGroups and PatientSatisfaction. Using the Analysis Menu, go to Non-parametric Statistics, go to LegacyDialogs, go to 2 Independent samples. Add InterventionGroups to the Grouping Variable and PatientSatisfaction to the Test Variable. Check Mann Whitney U. Click OK. Report the Medians or Means, the Mann Whitney U statistic, and the p level. Report (U =value, p =value). Report the p level out three digits.
6. WILCOXON Z: Identify the variables BaselineWeight and InterventionWeight. Go to the Analysis Menu, go to Non-parametric Statistics, go to LegacyDialogs, go to 2 Related samples. Add the BaselineWeight and InterventionWeight in the Pair 1 fields. Click OK. Report the Mean or Median weights, standard deviations, Z-statistic, and p level. Report as (Z =value, p =value). Report the p level out three digits.

Include the following in your paper:

1. Discussion of the types of statistical tests used and why they have been chosen.
2. Discussion of the differences between parametric and non-parametric tests.
3. Description of the reported results of the statistical tests above.
4. Summary of the conclusive result of the data analyses.
5. Outputs from the statistical analysis provided as an Appendix to the paper.
6. Comparison table of the variable’s level of measurement provided as an Appendix to the paper.

Use the following guidelines to report the test results:

• Statistically Significant Difference: When reporting exact p values, state early in the data analysis and results section, the alpha level used for the significance criterion for all tests in the project. Example: An alpha or significance level of < .05 was used for all statistical tests in the project. Then if the p-level is less than this value identified, the result is considered statistically significant. A statistically significant difference was noted between the scores before compared to after the intervention t(24) = 2.37, p = .007. 
• Marginally Significant Difference: If the results are found in the predicted direction but are not statistically significant, indicate that results were marginally significant. Example: Scores indicated a marginally significant preference for the intervention group (M = 3.54, SD = 1.20) compared to the baseline (M = 3.10, SD = .90), t(24) = 1.37, p = .07. Or there was a marginal difference in readmissions before (15) compared to after (10) the intervention ꭓ2(1) = 4.75, p = .06.
• Non-Significant Trend: If the p-value is over .10, report results revealed a non-significant trend in the predicted direction. Example: Results indicated a non-significant trend for the intervention group (14) over the baseline (12), ꭓ2(1) = 1.75, p = .26.

The results of the inferential analysis are used for decision-making and not hypothesis testing. It is important to look at the real results and establish what criterion is necessary for further implementation of the project’s findings. These conclusions are a start.